What approach does our clinic use for Onda Lifting?

1. Customized Design and Handpiece Usage Plan Before Treatment
The director directly diagnoses the patient's skin condition to establish a lifting plan. During this process, areas requiring elasticity improvement and contouring are meticulously identified. The 3mm and 7mm handpieces are adjusted and used according to each area, avoiding areas where cheek hollowing is a concern and focusing on areas that require tightening.

2. Application of Appropriate Energy Levels
During facial treatments, energy can be adjusted from 60,000 to 120,000 Joules. Rather than simply applying high energy, personalized energy levels are set considering the patient's skin type and desired results.

3. Precise Handpiece Speed Control
With Onda, the treatment results can vary depending on the handpiece's movement speed. At our clinic, we move slowly in areas where heat energy needs to accumulate sufficiently and quickly in sensitive areas, ensuring that heat is not excessively delivered while still achieving the desired results.

4. Customized Shot Distribution per Area
We go beyond simply using 3mm and 7mm handpieces as prescribed. Shot energy is precisely distributed considering the patient's facial volume and fat distribution. For example, for patients with less fat, we primarily use the 3mm handpiece, while for those with more fat in the double chin or jawline area, we increase the proportion of the 7mm handpiece.

Understanding Our Onda Lifting Treatment Method
Shortened Reaction Time
Even if the total energy delivered is the same, high-power energy delivery causes tissue temperature to rise more quickly.
This shortens the time it takes to reach the necessary energy accumulation zone,
and can be expected to advance the point at which the skin responds to the treatment.
Reduced Energy Loss in the Core Reaction Zone
Delivering high-power energy for a short period allows the target temperature to be reached before heat dissipates into surrounding tissues.
This helps induce a concentrated reaction in the dermis and subcutaneous fat layers without putting stress on the epidermis.
Consequently, even when using the same 60,000 Joules of energy,
treatment results can vary depending on the power adjustment method,
and at our clinic, we strive to ensure that these subtle differences positively influence treatment outcomes.

Key Features of Onda Lifting

Simultaneous Improvement of Lifting and Tightening
Onda Lifting is a treatment that delivers energy to the dermis and subcutaneous fat layers using 2.45GHz ultrashort microwave energy. Through this, you can expect both lifting and skin tightening effects.
Similar to a microwave oven, this device vibrates water molecules within the skin, generating frictional heat. This principle induces collagen contraction and production, and destroys fat cells, making it possible to experience lifting effects immediately after the treatment.
Microwave energy is selectively absorbed by the water layers within the skin, generating heat. This allows for concentrated heat energy delivery to the dermis and subcutaneous fat layers, while minimizing unnecessary irritation to the epidermis.
Onda Lifting has the advantage of achieving both lifting and tightening effects with a single device.
Generally, lifting focuses on refining facial contours, while tightening focuses on improving skin texture and enhancing elasticity. Onda is designed to address both these objectives simultaneously in one treatment.

How Onda Lifting Works

Onda Lifting utilizes two types of handpieces: 3mm and 7mm.
The 3mm handpiece delivers energy to the border between the dermis and the subcutaneous fat layer.
When heat is delivered to this depth, the production of collagen and elastin fibers is promoted, hyaluronic acid production is activated, and existing collagen fibers contract. Through this, an immediate skin tightening effect can be expected.
Furthermore, a reduction in water content within the fat layer, including edema, can lead to immediate changes in facial lines.
The 7mm handpiece delivers energy to the deeper subcutaneous fat layer, selectively damaging fat cell membranes and inducing cell death.
Damaged fat cells are expelled from the body via the lymphatic system, leading to facial contouring effects. Changes may begin approximately 2-3 weeks after treatment, with contour improvements starting to appear after 4 weeks, and the most noticeable effects experienced around 6 weeks. Since dead fat cells do not regenerate, relatively long-lasting effects can be maintained.
Additionally, by directly inducing contraction of the retaining ligaments, a lifting effect can be expected immediately after the treatment.
Temperature Control: For Onda Lifting to achieve its desired effects, it is crucial to slowly move the handpiece to accumulate sufficient heat until the target temperature is reached.
Principle of Selective Water Absorption: Microwaves are selectively absorbed only by water within the skin. This means that they generate heat primarily in fat cells and the water layers within the dermis, with minimal irritation to nerves or blood vessels. Therefore, one can consider a lifting treatment that reduces pain and lowers the risk of side effects.

Treatments That Can Create Synergy When Combined with Onda Lifting

While Onda Lifting can be performed alone at our clinic, combining it with Shurink (targeting the fascia layer) or Oligio (radiofrequency tightening) can further enhance synergistic effects.
Especially when combining multiple treatments on the same day, the reduced heat energy accumulation time can help achieve more satisfactory results.

총 에너지량이 같더라도, 고출력으로 에너지를 전달하면 조직 온도가 더욱 빠르게 올라갑니다.

이는 필요한 에너지 누적 구간에 도달하는 시간을 단축시키고,

피부가 시술에 반응하는 시점을 앞당기는 효과를 기대할 수 있습니다.

핵심 반응 구간에서의 에너지 손실 감소

고출력으로 짧은 시간 에너지를 조사하면 열이 주변 조직으로 분산되기 전에 목표 온도에 도달할 수 있습니다.

이는 표피에 부담을 주지 않으면서 진피와 피하지방층에 집중적인 반응을 유도하는 데 도움이 됩니다.

결과적으로 동일한 6만 줄의 에너지를 사용하더라도 출력 조절 방식에 따라

시술의 결과는 다르게 나타날 수 있으며,

본원에서는 이러한 미세한 차이가 시술 결과에 긍정적인 영향을 줄 수 있도록 노력합니다.

온다리프팅의 주요 특징

리프팅과 타이트닝의 동시 개선

온다리프팅은 2.45GHz의 극초단파 마이크로웨이브를 사용하여 진피와 피하지방층에 에너지를 전달하는 시술입니다. 이를 통해 리프팅과 피부 타이트닝 효과를 함께 기대할 수 있습니다.

이 장비는 전자레인지와 유사하게 피부 속 수분 분자를 진동시켜 마찰열을 발생시킵니다. 이러한 원리로 콜라겐 수축 및 생성을 유도하고 지방세포를 파괴하여, 시술 직후에도 리프팅 효과를 경험하실 수 있는 것이 특징입니다.

마이크로웨이브 에너지는 피부 내 수분층에 선택적으로 흡수되어 열을 발생시킵니다. 이로 인해 표피에는 불필요한 자극을 최소화하면서, 진피층과 피하지방층에 집중적으로 열 에너지를 전달할 수 있습니다.

온다리프팅은 한 가지 장비로 리프팅과 타이트닝 효과를 동시에 얻을 수 있다는 이점이 있습니다.

일반적으로 리프팅은 얼굴 윤곽을 정리하는 데 중점을 두며, 타이트닝은 피부결 개선과 탄력 증진에 초점을 맞춥니다. 온다는 이 두 가지 목적을 한 번의 시술로 동시에 진행할 수 있도록 고안된 장비입니다.

온다리프팅의 작용 원리

온다리프팅에는 3mm와 7mm 두 가지 종류의 핸드피스가 사용됩니다.

3mm 핸드피스는 진피층과 피하지방층의 경계 부위까지 에너지를 전달합니다.

이 깊이에 열이 전달되면 콜라겐과 엘라스틴 섬유의 생성이 촉진되고, 히알루론산 생성도 활성화되며, 기존 콜라겐 섬유의 수축이 일어납니다. 이를 통해 즉각적인 피부 타이트닝 효과를 기대해 볼 수 있습니다.

더불어 부종을 포함한 지방층의 수분이 감소하여 즉각적인 얼굴 라인 변화도 관찰될 수 있습니다.

7mm 핸드피스는 보다 깊은 피하지방층에 에너지를 도달시켜, 지방세포막을 선택적으로 손상시키고 세포 사멸을 유도하는 역할을 합니다.

손상된 지방세포는 림프계를 거쳐 체외로 배출되어 얼굴 윤곽 정리 효과를 유도합니다. 시술 후 약 2~3주부터 변화가 시작될 수 있으며, 4주 후에는 윤곽 개선이 나타나기 시작하고, 6주쯤 가장 뚜렷한 효과를 경험하실 수 있습니다. 사멸된 지방세포는 다시 재생되지 않아 비교적 장기적인 효과를 유지할 수 있습니다.

더불어 유지인대까지 직접적으로 수축을 유도하여 시술 직후에도 리프팅 효과를 기대할 수 있습니다.

온도 조절: 온다 리프팅이 원하는 효과를 내기 위해서는 목표 온도에 도달하도록 핸드피스를 천천히 움직여 열을 충분히 축적하는 기술이 중요합니다.

수분 선택적 흡수 원리: 마이크로웨이브는 피부 속 수분에만 선택적으로 흡수되는 성질을 가집니다. 이로 인해 신경이나 혈관에는 거의 자극을 주지 않으면서, 지방세포와 진피 내 수분층에만 집중적으로 열을 발생시킵니다. 따라서 통증 부담을 줄이고 부작용 발생 위험을 낮춘 리프팅 시술을 고려해볼 수 있습니다.

온다리프팅과 병행하면 시너지를 기대할 수 있는 시술

본원에서는 온다리프팅을 단독으로 진행하기도 하지만, 슈링크(근막층 타겟)나 올리지오(고주파 타이트닝)와 함께 시술할 경우 시너지 효과를 더욱 높일 수 있습니다.

특히 동일한 날에 여러 시술을 병행할 경우, 열 에너지 축적 시간이 줄어들어 더욱 만족스러운 결과를 얻는 데 도움이 될 수 있습니다.

The Sincere Approach of Our Chief Physicians

Our medical team consistently performs Onda Lifting procedures.

However, the lifting design is uniquely planned for each individual.

As chief physicians, we constantly research and contemplate for even better results after the procedure.

This is because we believe true lifting goes beyond simply operating the device; it involves deeply understanding skin texture and flow, and meticulously designing changes in each patient's facial contours.

The difference in Onda Lifting results can be created not just by simple device use, but by the skilled hands of our medical team.

Our medical institution approaches procedures with this expertise.

Onda Lifting: Why the Immediate Effects?

Onda Lifting utilizes microwave energy to selectively deliver heat to specific depths of 3mm and 7mm within the skin.

At this time, collagen fibers are rapidly heated to approximately 50 degrees Celsius, which can lead to changes in the size of fat cells.

Therefore, you can expect to see lifting effects immediately after the procedure.

This procedure does not require waiting for gradual changes;

one of the main features of Onda Lifting is that you can immediately feel improved elasticity and lifting effects.

Therefore, it can be a viable option for those who expect rapid changes.

Kkeut Korean Medicine Clinic's Onda Lifting

1. Pre-Procedure Design + Handpiece Strategy Planning

Our medical team places great importance on a precise design process before Onda Lifting procedures.

Through direct consultation, our medical team comprehensively assesses the patient's skin elasticity, fat distribution, volume, and lifting direction, then plans the treatment areas accordingly.

According to this plan, the 3mm handpiece, which focuses on stimulating the dermis, and the 7mm handpiece, which primarily targets the fat layer, are used appropriately for each area.

Based on our design, we strive to perform lifting tailored to each individual patient.

2. Sufficient Energy Guarantee + Detailed Settings

In Onda Lifting procedures, the total amount of energy is considered a crucial factor.

Our medical team performs customized procedures ranging from 40,000 joules to over 120,000 joules, meticulously establishing appropriate treatment durations and cooling strategies to prevent overheating.

3. Handpiece Speed and Heat Accumulation Control

Onda procedures can achieve lifting effects through effective heat accumulation.

Our medical team applies a method of maintaining a slower speed initially to encourage heat accumulation, and then increasing the speed in the later stages to reduce the risk of burns.

Such delicate control is only possible when based on the practitioner's extensive experience and expertise.

4. Handpiece Distribution and Shot Strategy Customization

Patients with a lot of fat in the cheek area and those primarily experiencing a loss of elasticity require different treatment strategies.

Our medical team adjusts the usage ratio of 3mm and 7mm handpieces, considering facial volume, fat distribution, and skin thickness.

For example, we primarily use the 7mm handpiece for the jawline area, where there is relatively more fat, and focus on the 3mm handpiece for the area directly below the cheekbones, where hollowing may be a concern.

This means that it is not just a simple application method, but a handpiece distribution strategy customized for each patient.

5. Chief Physicians' Design, Continuous Consideration and Research

Outside of consultation hours, our chief physicians virtually simulate changes in patients' faces and consistently repeat tests for more effective energy settings and handpiece placement.

Onda Lifting results can vary after the procedure, depending on the medical team's experience and design capabilities.

Onda Lifting is a procedure where the medical team's skilled techniques and judgment are crucial, going beyond mere device operation.

Recommended for

• 01. Those who desire jawline refinement due to a double chin, deep buccal fat, etc.
• 02. Those who experience deepening nasolabial folds and sagging, and wish for improvement.
• 03. Those who have concerns about facial contour and elasticity but have not found satisfactory changes.
• May be suitable for individuals in their 30s to 50s who are concerned about both fat and decreased elasticity.
• This treatment is for those who wish to reduce the burden of pain or recovery time during the procedure and expect a lifting effect.

Features of the Treatment

• A cooling system can minimize discomfort during the procedure, thereby reducing pain, though this may vary from person to person.
• You can feel an immediate tightening effect on the skin right after the procedure.
• You can return to your daily life without any difficulty immediately after the treatment.

Treatment Process

• STEP 01. First, cleanse your face and proceed with an individual consultation.
• STEP 02. Carefully apply oil to the treatment area.
• STEP 03. Perform the Onda Lifting treatment.

Post-Treatment Precautions

• After the procedure, you can wash your face and apply makeup immediately.
• It is advisable to avoid saunas, jjimjilbangs (Korean bathhouses), alcohol consumption, and smoking for about a week after the treatment.
• Occasionally, you might feel dryness due to heat in the treated area, so it helps to keep your skin hydrated by using plenty of moisturizing products.
• When going out, we recommend carefully applying sunscreen to protect your skin from UV rays.